nsaheaven.blogg.se - Removing battery cover 2002 peugeot 307

Always keep your hand holding the window from below so that the window stays up. Raise the window: While holding the window from above and below, push and lift the window up you can be more forceful here while lifting to really get the window high enough.Replace the screws: While grabbing the window from above and below, replace the screws that hold the regulator mechanism ledge and remove the piece of wood holding the window in place.

Step 4: Connect the Window and Motor and Raise the Window

Remove the polyethylene cover: You can use a razor blade to remove it instead of pealing it entirely off or just cut it along the inside of the car (see the video below).

Work your way along the sides and to the back of the door frame.

Remove the door panel: Using your hands or a flat-head screwdriver, gently start at the front edge of panel and pry it off.

Disconnect the two plastic wire switches: You can use a flat-head screwdriver to pull the connectors apart.

Remove the door console: Remove the door console using a flat-head screwdriver by prying it gently out.

(Always put your screws in a safe place.) Remove the plastic covers during this process and set them aside. Be sure to locate all screws-some will be under plastic covers, behind a door handle, beside a courtesy light, etc.

Remove all screws on the door panel: Remove the screws on the front of the driver's-side door panel (they may be plastic or metal).

My Car Temperature Gauge Reads High Step 1: Remove the Door Panel